Find Rail IG1 Apache Injector Omb Type, 4 Cylinders 3 Ohms Injector Rail, DC12V LPG/CNG Autogas Fuel Injection Rail on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Other Ignition Coil > OMB Type IG1 APACHE Rail Injector 4Cyl 3Ohms

OMB Type IG1 APACHE Rail Injector 4Cyl 3Ohms

  • OMB Type IG1 APACHE Rail Injector 4Cyl 3Ohms
  • OMB Type IG1 APACHE Rail Injector 4Cyl 3Ohms
  • OMB Type IG1 APACHE Rail Injector 4Cyl 3Ohms
  • OMB Type IG1 APACHE Rail Injector 4Cyl 3Ohms

OMB Type IG1 APACHE Rail Injector 4Cyl 3Ohms

    Payment Type: L/C,T/T,Paypal,Money Gram,Western Union
    Terms of Trade: FOB,CFR,CIF,EXW
    Min. Order: 1 Piece/Pieces
    Delivery Time: About 7 Days
    Packaging: Plastic bag, Box, Carton, Pallet
    Productivity: 100000 pcs per month
    Brand: Brando
    Transportation: Ocean,Land,Air
    Place of Origin: China Ningbo
    Supply Ability: 23000 pcs per week
    Certificate: CE
    Port: Ningbo,Guangzhou,Shanghai

Basic Info

Model No.: IG1 Apache

Product Description

OMB Type IG1 APACHE Rail Injector 4Cyl 3Ohms


The working principle of OMB Type IG1 APACHE 4Cyl 3Ohms Rail Injector:
1. The gas is stored in the guide rail and sprayed through the nozzle to the engine intake pipe.
2. The computer controls the nozzle injection. Three or four nozzles are mounted on the rail to accommodate different models.
3. The temperature and pressure of the gas entering the guide rail can be monitored. The maximum operating pressure is 300Kpa, and the high-frequency solenoid valve operates 7500 times per minute.
4. When the electromagnetic coil of the spray rail is energized, suction is generated, the needle valve is sucked up, and the spray hole is opened, and the gas is sprayed at a high speed through the annular gap between the shaft needle and the spray hole of the needle valve head to form a mist shape, which is favorable for combustion. Its main function is to inject fuel from the pressure reducer to each cylinder.


Technical data of OMB Type IG1 APACHE Rail Injector 4 Cylinders 3 Ohms:

Type IG1 Apache OMB Type
Normal voltage DC12V (±10%) (Other can be customized)
Spray path φ2.2mm, φ2.5mm
Flow port size φ3.5mm
Motion pattern Direct acting
Pressure 0.5 ~ 2.6 Bar
Temperature of media -40 ~ 120°C
Applicable media LPG, CNG
Intake mode Both sides (Intake port can be installed)
Opening time 2.2ms ± 5
Application IG1 Apache OMB Type 4 Cylinders 3 Ohms HD LPG / CNG Rail Injectors

Overall dimension of Omb Type Rail IG1 Apache Injector 4Cyl 3Ohms:

IG1 Apache OMB Type 4 Cylinders 3 Ohms HD LPG / CNG Rail Injectors

More display of OMB Type IG1 APACHE 4 Cylinders 3 Ohms Injector Rail:

OMB Type IG1 APACHE 4 Cylinders 3 Ohms Injector RailMore display of OMB Type IG1 APACHE 4 Cylinders 3 Ohms Injector Rail

More display of OMB Type IG1 APACHE 4 Cylinders 3 Ohms Injector RailMore display of OMB Type IG1 APACHE 4 Cylinders 3 Ohms Injector Rail


Replacement part of DC12V OMB Type LPG/CNG Autogas Fuel Injection Rail:

Replacement part of DC12V OMB Type LPG/CNG Autogas Fuel Injection Rail


Introduction to the performance and working principle of multi-point direct injection automotive gas system:

Multi-point direct injection type: The connection between the gas system and the engine is one connection point of each cylinder. The electric control system adopts the electronic injection method to control the air supply, so it is called multi-point direct injection type.

Its working principle is that after the gas is depressurized by the pressure reducer, it is supplied to the high-frequency injection valve and then the computer calculates the amount of fuel required by the engine, and the control valve is supplied to the engine for combustion, so its supply is very punctual and flexible, so its power It is much stronger than self-priming. There is no venturi mixer, so there will be no tempering and firing, and there is no increase in fuel consumption. Its work is mainly based on computer calculations, so its failure rate is very low. The overall performance of the multi-point direct injection type is more stable than the self-priming type. All models are universal when installed.


Some ways to improve the power after the oil is changed to gas:
1. Adding the ignition advance angle: What is the effect of adding the ignition advance angle? His only function is to achieve pre-ignition when the piston in the engine cylinder has not moved to the top dead center, so that the natural gas generates relatively large energy. This does make the power of the gas-burning car a little bit effective, but it only serves as an auxiliary.

2. Increase the Ignition Coil: the special spark plug for CNG car, the reason for adding this thing is because the burning point of natural gas is more than 200 degrees Celsius higher than that of gasoline, it is not easy to ignite, and the ignition coil is increased, that is, the ignition energy is increased, and the engine cylinder can be ignited. A mixture of natural gas and air.

3. Expand the spray hole diameter, or choose a large model of the spray hole diameter: According to normal, the 1.6-displacement car, the spray hole diameter only needs 1.6 specifications. However, the orifice diameter of the gas-changing car is generally not the same as the above ratio, but the 1.6-displacement uses the 2.0-gauge rail hole, and the 1.8-displacement uses the 2.2-gauge rail hole, thus increasing the supply of gas. In order to improve the power of the CNG automobile engine, natural gas cannot be completely burned in the engine due to excessive air supply. As the exhaust gas exceeds the standard, it is said that in the existing modified CNG car, 90% of the cars, exhaust gas detection is difficult to pass. This is the reason.


Welcome to your any question and inquiry!

NINGBO BRANDO HARDWARE CO.,LTD

  • 1
  • 2
  • 3
  • 4
  • 5
 

BRANDO is a professional manufacturer and designer of Solenoid Valve, Solenoid Valve Coil and Solenoid Valve Armature Assembly, located in Ningbo, China. And we can serve customers from various industries. Our company has been producing for more than 10 years, and cooperates with different customers such as oil & gas, chemical industry, water treatment, food & beverage, medical system and so on.


BRANDO maintains its high position in the industrial manufacturing. The advanced lathes and milling machinery are introduced, and from materials procurement to finished product and assembly, it is fully automated and controlled by computers, to improve product quality, and to continuously increase production and delivery efficiency.


BRANDO has fully adopted the ISO-9001 quality management system and introduced the most advanced precision equipment for product inspection, such as digital pressure gauges, computer applications, air leak testers, pressure testers and flow testers.


banner 2


Main Services:
1. Customized Design and Production: Brando can design and manufacture customized solenoid valves, solenoid coils and solenoid valve armature components to meet your specific needs and applications. We can provide services from small air treatment devices to large fluid systems.

2. Quality Assurance: In addition to designing and manufacturing high-quality products, Brando also provides 100% testing services for all components to ensure that they achieve the best performance under the best performance and to ensure that it runs well in your project.

3. Delivery and After-sales Service: Brando provides large inventory and on-time delivery within 5 to 10 days. We also provide unparalleled after-sales service and 1 year warranty for all products.



Product Categories:

1. Solenoid Coil
2. Solenoid Coil Connector
3. Solenoid Valve Armature Assembly
4. Solenoid Valve Timer
5. Brass Solenoid Valve
6. Stainless Steel Solenoid Valve
7. Plastic Solenoid Valve
8. Refrigeration Solenoid Valve
10. Pulse Jet Valve
11. Valve Diaphragm
12. Pulse Controller
13. Pneumatic Valve
14. Pneumatic Hose Fitting
15. Pneumatic Cylinder
16. Air Filter Regulator Lubricator
17. Pneumatic Actuator Valve
18. Electric Actuator Valve


Focus on your demands, Offer you best solution:


√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing


Welcome to your any question and inquiry!

Company Info

  • Company Name: NINGBO BRANDO HARDWARE CO.,LTD
  • Representative: Lu Jin Jun
  • Product/Service: Solenoid Valve Armatures , Solenoid Valve Coils , Pneumatic Solenoid Valves , Pneumatic Hose Fittings , Pulse Jet Valves , Refrigeration Solenoid Valves
  • Capital (Million US $): 1000,000RMB
  • Year Established: 2008
  • Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
  • Export Percentage: 81% - 90%
  • Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
  • No. of Production Lines: 10
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 11 -20 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 3,000-5,000 square meters
  • Factory Location: Ningbo
  • Contact Person: Mr. Brandon Bao
  • Tel: 86-0574-83879820
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters